DIMEAS - Dipartimento di Ingegneria Meccanica e Aerospaziale

2019
  1. State of Health Estimation of Lithium Batteries for Automotive Applications with Artificial Neural Networks
    proceeding

    Bonfitto, Angelo; Ezemobi, ETHELBERT NWABUGWU; Amati, Nicola; Feraco, Stefano; Tonoli, Andrea; Hegde, SHAILESH SUDHAKARA
    In: 2019 AEIT International Conference of Electrical and Electronic Technologies for Automotive (AEIT AUTOMOTIVE)
    IEEE
    2019 AEIT International Conference of Electrical and Electronic Technologies for Automotive (AEIT AUTOMOTIVE) (Torino)
    pp.5 (pp.1-5) ISBN:9788887237436 DOI:10.23919/EETA.2019.8804567

  2. Combined regression and classification artificial neural networks for sideslip angle estimation and road condition identification
    articolo

    Bonfitto, Angelo; Feraco, Stefano; Tonoli, Andrea; Amati, Nicola
    VEHICLE SYSTEM DYNAMICS
    Taylor and Francis
    pp.22 (pp.1-22) ISSN:0042-3114 DOI:10.1080/00423114.2019.1645860

2018
  1. Mode-shifting Minimization in a Power Management Strategy for Rapid Component Sizing of Multimode Power Split Hybrid Vehicles
    articolo

    Anselma, PIER GIUSEPPE; Huo, Yi; Edris, Amin; Joel, Roeleveld; Ali, Emadi; Belingardi, Giovanni
    SAE TECHNICAL PAPER
    SAE
    pp.10 ISSN:0148-7191 DOI:10.4271/2018-01-1018

  2. Safety Design and Development of a Human-Robot Collaboration Assembly Process in the Automotive Industry
    articolo

    Heydaryan, Sahar; Suaza Bedolla, Joel; Belingardi, Giovanni
    APPLIED SCIENCES
    MDPI AG
    Vol.8 pp.22 ISSN:2076-3417 DOI:10.3390/app8030344

  3. Optimized design and characterization of motor-pump unit for energy-regenerative shock absorbers
    articolo

    Galluzzi, Renato; Xu, Yijun; Amati, Nicola; Tonoli, Andrea
    APPLIED ENERGY
    Elsevier Ltd
    Vol.210 pp.12 (pp.16-27) ISSN:0306-2619 DOI:10.1016/j.apenergy.2017.10.100

  4. Design of electromechanical height adjustable suspension
    articolo

    Amati, Nicola; Tonoli, Andrea; Castellazzi, Luca; Ruzimov, Sanjarbek
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS. PART D, JOURNAL OF AUTOMOBILE ENGINEERING
    SAGE
    pp.17 (pp.1-17) ISSN:0954-4070 DOI:10.1177/0954407017728633

  5. Passenger car active braking system: Pressure control design and experimental results (part II)
    articolo

    Tota, Antonio; Galvagno, Enrico; Velardocchia, Mauro; Vigliani, Alessandro
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS. PART C, JOURNAL OF MECHANICAL ENGINEERING SCIENCE
    LONDON:SAGE PUBLICATIONS LTD
    Vol.232 pp.13 (pp.786-798) ISSN:0954-4062 DOI:10.1177/0954406217693032

  6. Passenger Car Active Braking System: Model and experimental validation (Part I)
    articolo

    Tota, Antonio; Galvagno, Enrico; Velardocchia, Mauro; Vigliani, Alessandro
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS. PART C, JOURNAL OF MECHANICAL ENGINEERING SCIENCE
    LONDON:SAGE PUBLICATIONS LTD
    Vol.232 pp.10 (pp.585-594) ISSN:0954-4062 DOI:10.1177/0954406216686388

2017
  1. Gearshift control for hybrid powertrains with AMTs
    proceeding

    Guercioni, GUIDO RICARDO; Vigliani, Alessandro; Galvagno, Enrico; Midlam Mohler, Shawn
    In: 2017 International Conference of Electrical and Electronic Technologies for Automotive
    IEEE (STATI UNITI D'AMERICA)
    2017 International Conference of Electrical and Electronic Technologies for Automotive (Torino, Italy) 15-16 June 2017
    pp.9 (pp.1-9) ISBN:9788887237269 DOI:10.23919/EETA.2017.7993202

  2. Improvement of Lap-Time of a Rear Wheel Drive Electric Racing Vehicle by a Novel Motor Torque Control Strategy
    proceeding

    Ghosh, Jyotishman; Tonoli, Andrea; Amati, Nicola
    In: SAE Technical Paper
    Society of Automotive Engineers
    WCX™ 17: SAE World Congress Experience (Detroit)
    DOI:10.4271/2017-01-0509

  3. A study on the role of powertrain system dynamics on vehicle driveability
    articolo

    Castellazzi, Luca; Tonoli, Andrea; Amati, Nicola; Galliera, Enrico
    VEHICLE SYSTEM DYNAMICS
    Taylor and Francis Online
    Vol.55 pp.17 (pp.1012-1028) ISSN:0042-3114 DOI:10.1080/00423114.2017.1294699

2016
  1. Mechanical properties of a thermoplastic adhesive modified with graphene nanoplatelets for automotive applications
    proceeding

    Ciardiello, Raffaele; Belingardi, Giovanni; Martorana, B.; Bertocchi, F.; Cristiano, F.; Zanetti, M.; Brunella, V.
    In: proc. of ICAutoC2016 – Int. Conf. on Automotive Composite
    ICAutoC2016 – Int. Conf. on Automotive Composite (Lisbon (P)) 21-23 September 2016
    pp.7 (pp.1-7)

  2. Characterization of Belt Drive Systems in Hybrid Powertrains
    proceeding

    DI NAPOLI, Maria; M., Straehle; Ruzimov, Sanjarbek; SUAREZ CABRERA, LESTER DANIEL; Amati, Nicola; Tonoli, Andrea
    In: Titolo volume non avvalorato
    AIAS – ASSOCIAZIONE ITALIANA PER L’ANALISI DELLE SOLLECITAZIONI, 45° CONVEGNO NAZIONALE, (UNIVERSITA' DEGLI STUDI DI TRIESTE) 7-10 SETTEMBRE 2016

  3. Intelligent Belt Drive Systems in Hybrid Powertrains: a Multipurpose Test Rig
    proceeding

    DI NAPOLI, Maria; M., Straehle; Ruzimov, Sanjarbek; SUAREZ CABRERA, LESTER DANIEL; Amati, Nicola; Tonoli, Andrea
    In: Titolo volume non avvalorato
    7th IFAC Symposium on Mechatronic Systems & 15th Mechatronics Forum International Conference (Loughborough University) 5-8 Settembre 2016

  4. Sideslip Angle Estimation of a Formula SAE Racing Vehicle
    articolo

    Ghosh, Jyotishman; Tonoli, Andrea; Amati, Nicola; Weitao, Chen
    SAE INTERNATIONAL JOURNAL OF PASSENGER CARS - MECHANICAL SYSTEMS
    SAE
    pp.8 ISSN:1946-3995

  5. Vehicle Driveability: Dynamic Analysis of Powertrain System Components
    proceeding

    Castellazzi, Luca; Tonoli, Andrea; Amati, Nicola; Piu, Alessandro; Galliera, Enrico
    In: Titolo volume non avvalorato
    SAE 2015 World Congress & Exhibition (Detroit, USA) April 12 - 14, 2016
    DOI:10.4271/2016-01-1124

  6. Torsional Oscillations in Automotive Transmissions: Experimental Analysis and Modelling
    articolo

    Galvagno, Enrico; Velardocchia, Mauro; Vigliani, Alessandro
    SHOCK AND VIBRATION
    Hindawi Publishing Corporation
    Vol.2016 pp.14 (pp.1-14) ISSN:1070-9622 DOI:10.1155/2016/5721960

2015
  1. Optimized Design for Electromechanical Power Transmission Systems
    proceeding

    Castellazzi, Luca; Galluzzi, Renato; GIRARDELLO DETONI, Joaquim; Amati, Nicola; Tonoli, Andrea
    In: Titolo volume non avvalorato
    XLIV Convegno Nazionale AIAS Associazione Italiana per l'Analisi delle Sollecitazioni (Messina (ITALIA)) 2-5 Settembre 2015

  2. GRAPHENE-BASED COMPOSITE MATERIALS FOR AUTOMOTIVES
    proceeding

    Elmarakbi, Ahmed; Azoti, Wiyao; Martorana, Brunetto; Belingardi, Giovanni; Ciardiello, Raffaele
    In: proc. of the ICCM20 - 20th International Conference on Composite Materials
    International Conference on Composite Materials
    ICCM20 - 20th International Conference on Composite Materials (Copenhagen (Denmark)) 19-24th July 2015
    Vol.proc. of the ICCM20 - 20th International Conference on Composite Materials pp.5 (pp.1-5)

2014
  1. The Motor Car, Past, Present and Future
    monografia

    Genta, Giancarlo; Morello, L.; Cavallino, F.; Filtri, L.
    Springer (STATI UNITI D'AMERICA)
    pp.662 ISBN:9789400785519

2013
  1. Lightweight design of vehicle body- a contribution toward greener environment
    proceeding

    Belingardi, Giovanni
    In: proc. of DEMI 2013
    DEMI 2013 (Banja Luka) 30 May- 1 June 2013
    pp.6 (pp.1-6)

  2. L’automobile, Evoluzione di una tecnologia
    monografia

    Genta, Giancarlo; Morello, L.
    Edizioni ASI Service (ITALIA)
    pp.345 ISBN:9788898344130

  3. Drivability enhancement and transient emission reduction for a mild hybrid diesel-electric truck
    articolo

    Galvagno, Enrico; Velardocchia, Mauro; Vigliani, Alessandro
    INTERNATIONAL JOURNAL OF POWERTRAINS
    Inderscience Enterprises Ltd.
    Vol.2 pp.30 (pp.262-291) ISSN:1742-4267

  4. Drivability analysis of through-the-road-parallel hybrid vehicles
    articolo

    Galvagno, Enrico; D., Morina; A., Sorniotti; Velardocchia, Mauro
    MECCANICA
    Springer
    Vol.48 pp.16 (pp.351-366) ISSN:0025-6455 DOI:10.1007/s11012-012-9606-6

Totale: 24